黑料社

黑料社

06 November 2026

Related Information

Hydrogen at the pump

20 Oct Hydrogen powered plant and generators are ready to work. But how will the gas be delivered on site? Will North reports.

GeoPura project manager Tej Chandeesingh (right) demonstrates refuelling
GeoPura project manager Tej Chandeesingh (right) demonstrates refuelling

Hydrogen, much like diesel, can be used in two ways to deliver energy to construction site. It can be used directly in plant, through an internal combustion engine or fuel cell. Or it can be used in a generator, to provide electricity for lights, accommodation and to recharge batteries.

At the Tilbury Hydrogen Hub, a green hydrogen production and demonstration project at the Port of Tilbury in Essex, green energy specialist GeoPura is tackling both of these uses, supplying modular, containerised systems that can generate hydrogen both through electrolysis to deliver energy through fuel cell powered generators, and to plant using a refuelling station. As well as producing hydrogen from local power sources, such as solar panels, the company鈥檚 Hydrogen Power Units (HPU), can be used to deliver large volumes of the gas from production sites further away.

HyKit, whose executive chair is JCB scion Jo Bamford, tackles a different problem: delivering hydrogen around sites, much like a traditional diesel bowser. Unlike GeoPura鈥檚 modular solution, which is designed to work from a dedicated area on site, HyKit鈥檚 mobile hydrogen bowser works without a compressor, with just a small battery needed for its control system. (See interview, p47).

Another firm, ULEMco, has also been developing systems for getting hydrogen molecules where they are needed. The company鈥檚 HyTANKa is, as the name suggests, more like a diesel tanker. The mobile refuelling system, considerably larger than HyKit鈥檚, can bring hydrogen to site and be used for plant refuelling. With two compressors, it can also refill its own tanks from lower pressure sources.

ULEMco鈥檚 smaller refueller 鈥� closer in its design to HyKit鈥檚 hydrogen bowser 鈥� is small enough for easy transport in a 3.5-tonne van. It can be used to provide hydrogen where it is needed, with the company suggesting it for hydrogen vehicle trials, non-road mobile machinery or operations in areas with limited refuelling infrastructure.

GeoPura鈥檚 starting point as a business was the need to balance the UK鈥檚 energy demands with the fluctuating generation of renewables. The company was formed in 2019, after team members had worked on research across the zero emissions space, explains chief hydrogen business officer Matt Barney. Hydrogen was just one way among others of easing the energy transition.

ULEMCo’s HyTanka
ULEMCo鈥檚 HyTanka

Like Toyota鈥檚 Jon Hunt (see p44), Barney sees great potential in hydrogen鈥檚 ability to store energy for long periods. 鈥淲e were really thinking about the role that zero emission fuels should be playing in large-scale energy storage,鈥� he says.

This article was first published in the September 2026 issue of 黑料社 Magazine. Sign up online.

But before hydrogen can be used to store excess power for renewables or new nuclear plants, it needs to be generated at scale. Barney sees the company鈥檚 HPUs as a way to achieve this in a commercially sustainable way, as it develops large scale hydrogen generation, including at its High Marnham and Doncaster sites. 鈥淭hey鈥檙e highly reliable and efficient. They provide incredibly stable, highly critical energy. So we built quite a strong market around those,鈥� he says.

While HPUs offer clear environmental benefits, Barney says customers are driven by other advantages. 鈥淭here鈥檚 a material advantage beyond the diesel generator. That reliability, the fact they鈥檙e really quiet, that you can get planning permits because of that,鈥� adds Barney. Indeed, they have been used heavily at concerts and in filming, where noise is a key concern.

GeoPura is producing its own hydrogen at Tilbury, and plans to increase production using local solar power. But it has much larger production sites, explains Tej Chadeesingh, technical project manager at the Lower Thames Crossing (LTC) for GeoPura. 鈥淲e鈥檙e producing hydrogen [at High Marnham] at about 30bar. We then compress that up in our MEGCs [multi-element gas containers, also known as tube trailers] to 300bar for delivery to site.

鈥淭hat鈥檚 our gas storage. That can be a source of hydrogen for whatever you want.鈥�

GeoPura鈥檚 HPUs are the main use case. 鈥淭hose are fuel cell powered generators,鈥� explains Chadeesingh. 鈥淏ut at Tilbury they are also being used as a hydrogen refueller. Another unit is designed first as a compressor, compressing gas up to higher pressures 鈥� typically vehicles operate at either 350bar or 700bar.

鈥淭he refueller then fills vehicles under a set of tightly controlled protocols regarding fill rates, taking into account size of vehicle and ambient temperature, controlling how fast you can dispense.鈥� The nozzle itself is designed to a high standard and built to high tolerances with manufacturers WEH and St盲ubli the two dominant players.

The refueller can fill hydrogen tanks with similar ease and speed to a diesel pump. 鈥淕reat leaps have been made in battery electric vehicle designs,鈥� Chandeesingh says, 鈥淏ut when you鈥檙e talking about plant that requires lots of energy, it鈥檚 really difficult to integrate an electric solution that is fast enough.鈥� Hydrogen tanks and power systems, whether fuel cell or internal combustion, are also much lighter than batteries, particularly on larger equipment.

GeoPura鈥檚 system, centred on HPUs, is designed primarily to bring relatively large volumes of fuel to site. HyKit鈥檚 mobile refueller does not carry as much fuel but, with no compressor, is lighter and easier to transport: it can fit on its own towed trailer or be carried around site on a small handler. HyKit has worked with manufacturers Moffett and Brian James Trailers to develop both options.

John Vickers is HyKit鈥檚 director of engineering. He started his career at Air Products, before joining startup NanoSUN as the company was developing its own mobile hydrogen refueller: like GeoPura鈥檚 HPUs and ULEMco鈥檚 HyTANKa, this was a larger, 20ft container-sized unit. Here, he first started to learn about the cascade system that would be used at HyKit.

When NanoSUN succumbed to financial challenges, Vickers moved to HyKit. At the start, the team set up in an AirBnB near JCB鈥檚 offices. 鈥淢onday morning, we鈥檇 all turn up together, and go to the JCB offices,鈥� he recalls. 鈥淭hen back home together for dinner, continue planning the business, doing the strategy work. Next morning, we鈥檇 have breakfast together and start working again.鈥�

The technology at the heart of the HyKit system is a cascade refueller. 鈥淭hat means we鈥檙e not putting any more energy into the system to get the hydrogen back out,鈥� Vickers explains. This keeps the weight and size of the refueller down.

Related Information

鈥淲e put in the gas at 750bar, and refuelling machines at 300bar. We use the pressure difference to drive the gas into the receiving vehicle.鈥�

This article was first published in the September 2026 issue of 黑料社 Magazine. Sign up online.

The trick is making sure each of the refueller鈥檚 six tanks discharges as much hydrogen as possible.

鈥淲e can use one tank at a time and that allows us to get more hydrogen out of the refueller,鈥� Vickers says. Each tank is connected to a manifold.

鈥淲e聽 can choose which tank to open, when and for how long. If the vehicle鈥檚 at 50bar and one tank is at 300bar, the gas flows until they equalise at 150bar. We can then open the next tank, which might be at 400bar, and equalise to 300bar. And then the next tank might be at 500bar 鈥� equalise that, and the vehicle tank is full.鈥�

The cascade system allows the refueller to dispense 70-75% to fill tanks at 350bar. But it can also be used to partially fill tanks to lower pressures, with a quick refill allowing equipment to be used through the day.

The system is controlled using a set of sensors and solenoids. These require a small amount of electric power to open (this is what the small battery is for) and will close automatically if power is lost, preventing leaks. Throughout its supply chain and manufacturing process, HyKit focuses on eliminating the risk of leaks.

At its factory, key components of the cascade system are inspected and installed is a cleanroom, avoiding micron-size particles that could keep a valve blocked open. And in the supply chain, the company has taken lessons from the engineers at JCB to ensure components are delivered to tight specifications.

The HyKit factory is now ready to deliver about 200 units a year comfortably, Vickers says, with space to increase this to around 500 units a year. As well as the construction sector, and kit like JCB鈥檚 hydrogen internal combustion engine backhoes, HyKit is looking to other industries: Vickers says it is seeing lots of opportunity around ports and airports.

The mobile refueller will be HyKit鈥檚 immediate focus. But Vickers sees other potential markets to address. 鈥淲e鈥檙e looking at entering the market for compression,鈥� he says. 鈥淎nd a mobile refueller is just a fixed refueller that moves, so we鈥檙e looking at doing fixed infrastructure as well.鈥�

This could see the company supplying systems to forecourts, allowing for hydrogen to be scaled up gradually if and when more drivers buy hydrogen vehicles.

GeoPura鈥檚 contract with LTC will see it supply hydrogen across the project. Its first installation was with the Bouygues Murphy JV delivering the middle section of the project. It will also supply Balfour Beatty, working on the North Roads section, and Skanska, which will be building the junction at the south of the project.

鈥淲e鈥檙e contracted to deliver a minimum two and a half million kilos of hydrogen over the five years,鈥� says Chandeesingh. 鈥淭he contract is set up so that we鈥檙e ready to provide hydrogen for whatever use case they want it for, mostly split between generators and mobile plant.鈥�

鈥淭here鈥檚 not a massive amount of plant available on the market at the moment, but the National Highways team at LTC are keen to get all of the delivery partners to sign up to using at least some mobile hydrogen plant. In terms of generators, we鈥檙e hoping a lot of them will take GeoPura鈥檚 HPUs.鈥�

Shortly before TCI spoke to the GeoPura team, the news broke that Canadian fuel cell manufacturer Ballard Power had agreed to acquire the company. At Ballard鈥檚 latest earnings call, the company foregrounded the investment, and stated a long-term aim of bringing GeoPura鈥檚 approach to North America.

Refuelling with a HyKit mobile refueller
Refuelling with a HyKit mobile refueller

Barney sees the UK commitment to cut emissions, and National Highways鈥� role as a carbon pathfinder, as key to the sector鈥檚 growth. 鈥淭he government鈥檚 ambition here is to really turn the dial to get that trust and confidence now in hydrogen fuel, that鈥檚 as good as in most cases if not better than the fossil fuel alternatives.

This article was first published in the September 2026 issue of 黑料社 Magazine. Sign up online.

鈥淕etting that use case out there and just matching that supply with people who are producing brilliant bits of kit, who previously haven鈥檛 been able to get the molecules, will, we hope, bring use to the next stage, and ultimately we鈥檒l be filling salt caverns.鈥�

MPU
MPU

Construction News

Related News

Click here to view latest construction news »